The only handhold electronic vacuum seal available, this battery-powered device saves the time and effort of manually pumping the air from opened bottle, including flanged-rim designs, the durable unit removes air from opened bottles at the touch of one button, bottles are saved as though they’d never been opened.
 Let you enjoy a glass or two of fine wine,  then keep what remains for later enjoyment. 
Place it on top of the opened bottle, vacuum pump automatically activates and tell you when seal is completed Built-in thermometer with LCD shows wine’s temperature so you know when serving is optimal

    Product VS2（Enlarge）

Working（Enlarge）

Replacing of batteries (2pcs of AAA batteries)

When the capacity of the batteries is low, the battery status “Lo” with a battery icon will display on the LCD.  Remove the battery cover as shown to replace the batteries, observing the correct polarity on the battery compartment. (as Fig.2) Close the battery cover by turning it clockwise .

Sealing the wine bottle

Position the unit over the upright wine bottle & push down gently. The battery-operated pump automatically removes the air.

The blue back light comes on to indicate the unit is powered on.

The pressure indicating button goes down during vacuuming.

Notes:

When the wine bottle with the unit is tilted over 30⁰C, the unit will power off for automatic protection.

When the unit works for over 60 seconds and air storage can not reach the preset value, the unit will stop working. The LCD will show “Err” to inform the user there is something wrong with the sealing parts or any other malfunction which needs repairing.

Removing the vacuum sealer

Press the pressure release button

The blue back light comes on to indicate the unit is working to break the vacuum.

When the LCD shows “OK”, remove the unit.

After the unit is removed, the pressure indicating button will be in the up position.

Testing of wine temperature

When the LCD shows “OK”, tilt the wine bottle forward to the wine touch the bottleneck.  Press the  ^0C/0F button, the LCD is lighting, and the wine temperature is showed on the LCD.

Specification:

Power source:  3V (2pcs of AAA batteries), low battery voltage warning: 2.4V

Time of pumping each cycle: 100seconds

Interval of each time: ≧4hrs

Applied for the diameter of wine bottle: ¾ inch (17.5-19.5mm)